DOUBLE EFFECT DUNK RING – REF. 1B090322

REF. 1B090322

This model of DUNK RING for the practice of sports basketball has been designed and manufactured by ANTUCO & EMD in our facilities in Zaragoza (Spain)

All basketball rings and minibasket are manufactured at the Antuco & emd facilities following the current standards.

The inside diameter of the ring is 0,45 m, the distance from the inner side of the ring to the backboard is 0,15 m. The fastening of the ring to the backboard is done through a plate and screws. All the metallic structure follows an anti-grease phosphate of zinc process and afterwards goes through the painting tunnel. This painted finish is carried out with orange polyester powder paint in high-temperature furnace, achieving a large resistance. This process gives to the metallic structure a high anti-rust resistance, a high impact resistance, great brightness and colour stability in a continuous exposure to 150º C.

The dunk basketball rings are manufactured with a calibrated rod of D = 20 mm and with 12 hooks to hold the net. This ring model has a folding system and fastening to the backboard. This is done by means of folded plates. It includes a protection system for the player’s safety. This system protects the ring and backboard in case the players hang. Due to its system, the bounce of the ball retains its properties like those of a fixed ring. It must respond to a static load of 105 Kg applied to the end of the ring opposite the backboard. The ring have to only divert 30º from the horizontal and after being free of the load it must return to its original position.